Dell Studio 1435 Setup Manual page 41

NOTE: If you see a message stating that no
diagnostics utility partition has been found,
run the Dell Diagnostics from the Drivers
and Utilities media.
Press any key to start the Dell Diagnostics
4.
from the diagnostics utility partition on your
hard drive.
Starting Dell Diagnostics From the Drivers and
Utilities Media
Drivers and Utilities media.
1. Insert the
2. Shut down and restart the computer.
When the DELL logo appears, press <F12>
immediately.
NOTE: If you wait too long and the
operating system logo appears, continue to
wait until you see the Microsoft
desktop; then, shut down your computer
and try again.
NOTE: The next steps change the boot
sequence for one time only. On the next
start-up, the computer boots according to
the devices specified in the system setup
program.
3. When the boot device list appears, highlight
CD/DVD/CD-RW and press <Enter>.
Select the
4.
the menu that appears and press <Enter>.
5. Type 1 to start the CD menu and press
<Enter> to proceed.
6. Select
the numbered list. If multiple versions are
listed, select the version appropriate for your
computer.
Windows When the Dell Diagnostics
7.
® ®
appears, select the test you want to run.
Using Support Tools
Boot from CD-ROM option from
Run the 32 Bit Dell Diagnostics from
Main Menu
41