Name Display - NEC NEAX 2000 IPS User Manual

NAME DISPLAY

term
NOTE: Display D
A name with up to 8 characters can be entered to display the name
term
on other D telephones when making a call.
Press Speaker
Receive dial tone.
Dial the Name
Assignment access
code and receive
special dial tone.
Using the keypad,
depress the key
with the desired
letter to display the
first letter on the
key. The display will indicate the numerical designation.
Subsequent depressions will advance through the letters on
that key. The following TABLE can be used as a guide to
indicate the key and the number of depressions required to
display numbers, letters, spaces and periods.
When the desired letter is displayed, depression of the
Transfer key will change the letter to a lower case letter
(default is upper case). Depress the
letter and advance to the next entry.
Repeat the previous two steps until the desired name is
displayed and entered.
Press Speaker.
For example, to
enter "Paul":
Hold key to enter that
33