Arp Table; Lan; Lan Settings - SMC Networks 7901BRA4 - annexe 1 Manual

1-port annex a adsl/adsl2+ router

Table of Contents

3.3.5 ARP Table

Choose Status > ARP Table. In the ARP Table page, you can view the table which shows a list of learned MAC

addresses.

3.4

In the navigation bar, choose LAN. The LAN page that is displayed contains LAN Settings and DHCP Settings.

In this page, you can use the LAN configuration to define an IP address for the router and configure the DHCP

server.

Choose LAN > LAN Settings. In the LAN Settings page, you can configure the LAN network. In this page, you

can change IP address of the router. The default IP address is 192.168.2.1. This is the private IP address of the

router. This is the address under which the router can be reached in the local network. It can be freely assigned from

the block of available addresses.

The following table describes the parameters and buttons of this page.

Field

IP Address

SMC7901BRA4 User Manual

Enter the IP of LAN interface. It is recommended to use an address from a

block that is reserved for private use. This address block is 192.168.2.1-

Description

Table of Contents

Barricade smc7901bra4