VDO MI 2050 Manual

Multimedia Interface
MI 2050
• Enables stand-alone use of
one VDO Dayton monitor
• Small dimensions
and easiest installation
Automatic Source Selection
Based on its source priority logic, MI 2050 can switch auto-
matic between both possible sources. The reversing camera has
always highest priority and will be shown automatically when
the rear gear gets active. The monitor will stay dark (blacklight
off) when no signal is available. This function is for driver's
safety reason.
Input for up to 2 sources
The MI 2050 provides input for up to 2 different sources.
- 1 VDO Dayton Reversing Camera (RV 5200 or RV 5100)
- 1 universal AV source, such as DVD Player DV 6200 or
TV 5200 or DTV 6500
Integrated power supply for reversing camera
To make the installation more simple and less costly MI 2050
provides an integrated power supply for a VDO Dayton Rever-
sing Camera. This is the most simple and safest way to get the
rear view image on the screen.
• Input for one universal AVsource
• Input for one VDO Dayton
reversing camera
• Power supply for camera
integrated
Product Information
Options
• Reversing camera RV 5200 for integrated
installation (Colour, PAL 50Hz)
• Reversing camera RV 5100 for
external installation (b/w, 50Hz)
• Video components
(e.g. TV tuner, DVD player, Game console...)
Small dimensions
Together with the new RV 5200 color camera and the new
MM 5200 monitor it is a highly attractive system with small
dimensions.
Monitor Connection
When connecting a monitor to the MI 2050 you may chose
between a connection via CVBS (Mitsumi) or RCA. Please note
that the MI 2050 can only drive one monitor at a time even
if there are two mechanical connections possible. A parallel
usage of RCA and Mitsumi connectors is not possible.
Since there is no connection of a navigation computer's signal
forseen, IR and RGB signals are not supported.