Protecting Against Electrostatic Discharge; Battery Disposal - Dell Inspiron 600m Owner's Manual

When Using Your Computer (continued)
Ground yourself by touching the unpainted metal surface of the I/O panel on the back of
4
the computer.
While you work, periodically touch the I/O panel to dissipate any static electricity that
might harm internal components.

Protecting Against Electrostatic Discharge

Static electricity can harm electronic components inside your computer. To prevent static
damage, discharge static electricity from your body before you touch any of your computer's
electronic components, such as a memory module. You can do so by touching an unpainted
metal surface on the computer's I/O panel.
As you continue to work inside the computer, periodically touch an I/O connector to remove
any static charge your body may have accumulated.
You can also take the following steps to prevent damage from electrostatic discharge (ESD):
• When unpacking a static-sensitive component from its shipping carton, do not remove
the component from the antistatic packing material until you are ready to install the
component. Just before unwrapping the antistatic packaging, be sure to discharge static
electricity from your body.
• When transporting a sensitive component, first place it in an antistatic container or
packaging.
• Handle all sensitive components in a static-safe area. If possible, use antistatic floor pads
and workbench pads.

Battery Disposal

Your computer uses a lithium-ion battery and a reserve battery. For instructions about replacing
the lithium-ion battery in your computer, see "Using a Battery" on page 46. The reserve battery
is a long-life battery, and it is very possible that you will never need to replace it. However,
should you need to replace it, see page 51 for instructions.
Do not dispose of the battery along with household waste. Contact your local waste disposal
agency for the address of the nearest battery deposit site.
When Using Yo ur Computer
17