Titan UR 2300 Instructions Manual page 5

3 Press the button of which the captured func-
tion shall be deleted, e.g. 3, briefly. The LED
will flash once and the learnt button function
is deleted.
4 Press and release LEARN button for exit of
deletion mode.
Reset/deletion of all learnt button functions
for a device
1 Press SELECT button to select device, of
which all learnt button codes shall be deleted,
as often until requested device LED e.g. TV
is on.
2 Press LEARN button and then 3 button simul-
taneously until device lamp (LED) goes out.
Then release buttons. LED will flash twice. All
learnt button functions of selected device will
be deleted.
Assigning volume and mute button exclus-
ively to one appliance (punch through)
1 Press (power) button and then VOLUME+
button simultaneously until device lamp (LED)
lights constantly.
2 Press SELECT button to select the device,
which always shall be used for volume con-
trol, as often until requested device LED, e.g.
TV, is on.
3 Press OK (or
Disable volume and mute button punch
through function
1 Press (power) button and then VOLUME-
button simultaneously until device lamp (LED)
Vivanco GmbH, D-22926 Ahrensburg, E-Mail: hotline@vivanco.de, Helpline: +49 (0) 4102 231135
) button
lights constantly.
2 Press 0 button and punch through will be dis-
abled
Program Macros (Home Cinema Applica-
tion)
(UR 2400 only)
You can program up to 5 sequences, called
macros, of up to 16 control commands each to
be output on pressing on one single button.
1 Press LEARN button and then
button simultaneously until a device lamp
(LED) lights constantly.
2 Press SELECT button to select the device
mode on which you like to set a macro button,
e.g. until TV LED is on.
3 Press any button except LEARN and SE-
LECT, e.g. RED, which you like to operate a
macro sequence. LED flashes twice and then
stays on.
4 Program the macro sequence, e.g. "All
Devices Off", by pressing buttons SELECT
TV, (power),
(power), SELECT BLURAY/DVD,
SELECT HTS/AMP,
- When memory is full LED flashes twice and
macro input is terminated.
5 Press LEARN button to save macro and ter-
minate input mode.
6 Test macro by pressing the selected macro
button, e.g. RED. Then all devices shall be
switched off one after another.
(power)
SELECT SAT/DVB,
(power),
(power).
5