Download Print this page
NAD PP 375 Datasheet
NAD PP 375 Datasheet

NAD PP 375 Datasheet

Phono preamplifier mdc module

Advertisement

Quick Links

PP 375 Phono Preamplifier MDC Module
The PP 375 is a simple dealer-installed module that integrates a very high performance phono input with our top
Classic Series Integrated Amps, the C 375BEE and C 356BEE. This high performance phono stage supports both low
and high output moving coil cartridges, as well as the broad selection of moving magnet and moving iron cartridges on
the market today.
Features
> Fantastic Vinyl Playback
An extremely accurate RIAA filter (required for LP
playback) with excellent sensitivity, high overload
margins and extremely low levels of noise and distortion,
extract every nuance of sound from your LPs.
> MDC Modular Design Construction
This MDC upgrade module represents our belief that
customers should be able to easily add new features
in the future without replacing the entire component.
MDC not only reduces cost, but also the impact on the
environment.
Specifications
Input Sensitivity
Input Overload
RIAA Accuracy
Total Harmonic Distortion
IHF A Signal to Noise
Channel Separation
NAD Electronics International reserves the right to change specifications or features without notice. NAD is a registered trademark of NAD Electronics
International. All rights reserved. No part of this publication may be reproduced, stored, or transmitted in any form whatsoever without the written
permission of NAD Electronics International. © 01/11 11-001 NAD Electronics International.
www.NADelectronics.com
PP375
Moving Coil
1.6mV
>4mV (20Hz – 20kHz)
+/- 0.25dB
<0.03% (20Hz – 20kHz)
>76dB (100 Ohms load)
1kHz
>80dB
10 kHz
>70dB
>Award-winning Design
The PP 375 circuit, designed by Director of Advanced
Development, Bjorn Erik Edvardsen, is based on many
award-winning preamp designs. MDC also received the
prestigious RedDot Design Award in 2009.
> Seamless Integration
Unlike other external phono preamps, the PP 375 does
not need extra wires, power supplies or interconnect
cables. Automatically assigned to the DISC input
selection on the MDC amp, the level is well matched to
other line level inputs.
Moving Magnet
18mV
>40mV (20Hz – 20kHz)
+/- 0.25dB
<0.03% (20Hz – 20kHz)
>77dB (IHF cartridge load)
>80dB
>70dB

Advertisement

loading