Removing Copy Pairs
You can remove one or more virtual disk copies by using the Copy Manager.
Any virtual disk copy-related information for the source virtual disk and the
target virtual disk is removed from the Virtual Disk Properties dialog and the
Storage Array Profile dialogs. When you remove a virtual disk copy from the
storage array, the Read-Only attribute for the target virtual disk is also removed.
After the virtual disk copy is removed from the Copy Manager, you can either
select the target virtual disk as a source virtual disk or the target virtual disk for
a new virtual disk copy. If you remove a virtual disk copy, the source virtual disk
and the target virtual disk are no longer displayed in the Copy Manager.
Keep these guidelines in mind when you remove copy pairs:
•
Removing copy pairs does not delete the data on the source virtual disk or
target virtual disk.
•
If the virtual disk copy has a status of In Progress, you must stop the
virtual disk copy before you can remove the copy pair.
To remove copy pairs:
1 In the AMW, select Virtual DiskCopy Manager.
The Copy Manager window is displayed.
2 In the table, select one or more copy pairs.
3 Select CopyRemove Copy Pairs.
The Remove Copy Pairs dialog is displayed.
4 Click Yes.
182
Configuration: Premium Feature—Virtual Disk Copy