Dell 800F Series User Manual page 4

E828fiW.book Page iv Thursday, July 2, 1998 7:51 PM
•
High temperatures can cause problems. Don't use your monitor in direct sunlight, and
keep it away from heaters, stoves, fireplaces, and other sources of heat.
•
Unplug the monitor when it is going to be left unused for an extended period of time.
•
Unplug your monitor from the AC outlet before any service.
Polish Center for Testing and Certification
Notice
The equipment should draw power from a socket with an attached protection circuit (a
three-prong socket). All equipment that works together (computer, monitor, printer, and so
on) should have the same power supply source.
The phasing conductor of the room's electrical installation should have a reserve short-
circuit protection device in the form of a fuse with a nominal value no larger than 16
amperes (A).
To completely switch off the equipment, the power supply cable must be removed from
the power supply socket, which should be located near the equipment and easily
accessible.
A protection mark "B" confirms that the equipment is in compliance with the protection
usage requirements of standards PN-93/T-42107 and PN-89/E-06251.
®
1-iv Dell 800F Series, 828FI Monitor User's Guide