ras> sys edit autoexec.net
EDIT cmd: q(uit) x(save & exit) i(nsert after) d(elete) r(eplace) n(ext)
ip nat loopback on
bridge mode 1
:
sys rn pingcheck 1
ras >
(4) VPN Setting
1. Switch to GUI menu Security > VPN, click the '+' icon as following to add a VPN-IKE
rule.
2. Configure VPN-IKE setting on ZyWALL 2 Plus as following.
All contents copyright (c) 2006 ZyXEL Communications Corporation.
enter 'i' to insert the command, enter 'x' to save and exit then.
ZyWALL 1050 Support Notes
117