ZyXEL Communications MWR222 - V1.0 Manual page 117

Use Fixed IP Select this option If the ISP assigned a fixed IP address.
Address
My WAN IP Enter your WAN IP address in this field if you selected Use Fixed
Address
IP Address.
WAN DNS Assignment
Select From ISP if your ISP dynamically assigns DNS server
information (and the MWR222's WAN IP address). The field to the
right displays the (read-only) DNS server IP address that the ISP
assigns.
Select User-Defined if you have the IP address of a DNS server.
Enter the DNS server's IP address in the field to the right. If you
First DNS Server
chose User-Defined, but leave the IP address set to 0.0.0.0,
Second DNS Server
User-Defined changes to None after you click Apply. If you set a
second choice to User-Defined, and enter the same IP address,
the second User-Defined changes to None after you click Apply.
Select None if you do not want to configure DNS servers. If you do
not configure a DNS server, you must know the IP address of a
computer in order to access it.
The MAC address section allows users to configure the WAN port's
MAC address by either using the MWR222's MAC address, copying
WAN MAC Address
the MAC address from a computer on your LAN or manually
entering a MAC address.
Select Factory default to use the factory assigned default MAC
Factory default
Address.
Clone the Select Clone the computer's MAC address - IP Address and
computer's MAC enter the IP address of the computer on the LAN whose MAC you
address - IP are cloning.
Address
Set WAN MAC Select this option and enter the MAC address you want to use.
Address
Apply Click Apply to save your changes back to the MWR222.
Reset Click Reset to begin configuring this screen afresh.
MWR222 User's Guide
117