ZyXEL Communications MS-7206 - EDITION 1 Manual page 216

Modular ethernet switch system
Hide thumbs Also See for MS-7206 - EDITION 1:
Table of Contents

Advertisement

Chapter 29 IP Source Guard
The following table describes the labels in this screen.
Table 68 DHCP Snooping
LABEL
Database Status
Agent URL
Write delay timer
Abort timer
Agent running
Delay timer expiry
Abort timer expiry
Last succeeded
time
Last failed time
Last failed reason
Total attempts
Startup failures
Successful
transfers
216
DESCRIPTION
This section displays the current settings for the DHCP snooping
database. You can configure them in the DHCP Snooping
Configure screen. See
Section 29.5 on page
This field displays the location of the DHCP snooping database.
This field displays how long (in seconds) the switch tries to
complete a specific update in the DHCP snooping database before
it gives up.
This field displays how long (in seconds) the switch waits to
update the DHCP snooping database after the current bindings
change.
This section displays information about the current update and
the next update of the DHCP snooping database.
This field displays the status of the current update or access of
the DHCP snooping database.
none: The switch is not accessing the DHCP snooping database.
read: The switch is loading dynamic bindings from the DHCP
snooping database.
write: The switch is updating the DHCP snooping database.
This field displays how much longer (in seconds) the switch tries
to complete the current update before it gives up. It displays Not
Running if the switch is not updating the DHCP snooping
database right now.
This field displays when (in seconds) the switch is going to update
the DHCP snooping database again. It displays Not Running if
the current bindings have not changed since the last update.
This section displays information about the last time the switch
updated the DHCP snooping database.
This field displays the last time the switch updated the DHCP
snooping database successfully.
This field displays the last time the switch updated the DHCP
snooping database unsuccessfully.
This field displays the reason the switch updated the DHCP
snooping database unsuccessfully.
This section displays historical information about the number of
times the switch successfully or unsuccessfully read or updated
the DHCP snooping database.
This field displays the number of times the switch has tried to
access the DHCP snooping database for any reason.
This field displays the number of times the switch could not create
or read the DHCP snooping database when the switch started up
or a new URL is configured for the DHCP snooping database.
This field displays the number of times the switch read bindings
from or updated the bindings in the DHCP snooping database
successfully.
218.
MS-7206 User's Guide

Advertisement

Table of Contents
loading

This manual is also suitable for:

Ms-7206 - manual 2Mm-7201Mp-7202Ms-7206s

Table of Contents