Event Setup; Event Servers - ZyXEL Communications IPC-3605N User Manual

The first consumer-friendly network camera

Hide thumbs Also See for IPC-3605N:

Table of Contents

represents highest priority is 46. The default DSCP value is 0, which indicates normal

priority (no QoS).

The following is a table of recommended DSCP values. The drop precedence indicates

the order in which IP packets will be dropped when the network is congested. Packets

with a higher drop precedence will be dropped first. Each class in the table is assigned a

certain amount of bandwidth.

Drop

Class 1

Precedence

High

Medium

Low

Important note: For QoS to function properly, all switches and routers in your network

must also support QoS.

5.6 Event Setup

From this page, your camera can be programmed to respond to events – such as detected

motion, or a triggered I/O device – and send a snapshot directly to your e-mail account,

ftp server, image server, notification server, HTTP server, or SMS server in order to warn

you about what's happened.

5.6.1

This page provides 6 different server-types capable of receiving notification of events: E-

mail, FTP, Image, Image, Notify, HTTP, and SMS. To set up Event Servers, navigate to

[Setup] > [Event Setup] > [Event Server Setup]. The following screen will appear.

5.6.1.1

E-Mail Server

Your camera supports standard SMTP on SSL-protected webmail platforms such as

Hotmail (Windows Live), and Gmail. To utilize this function, navigate to [Setup] >

[Event Setup] > [Event Server Setup] > [Email Event Server Setup]. The following

screen will appear.

Class 2

Class 3

Class 4

Table of Contents