Starting The Appliance; Start/Stop Button - PALSON LE CUISINE 30621 Operating Instructions Manual

GB
Our products are developed to the highest standards of quality, functioning and design. We hope you enjoy your new PALSON
LE CUISINE multicooker.
IMPORTANT PRECAUTIONARY MEASURES
Before using this electrical appliance, you should follow the following basic precautionary measures.
1. Read all the instructions.
2. Before you use your appliance, check that the voltage in your home is the same as indicated on the product label.
3. If the power cable is damaged, it must be replaced by the manufacturer or his authorised technical agent or by a qualified
technician, so as to avoid any danger
4. Do not touch hot surfaces.
5. To avoid electric shock, do not submerge the cable, the plugs or the unit housing in water or any other liquid.
6. Disconnect the appliance from the power supply when not in use, before adding or removing extra accessories, and before
cleaning.
7. Do not let the cable hang over the edge of the table or come into contact with a hot surface.
8. The use of a component that has not been recommended by the manufacturer of the appliance may cause personal injury.
9. You must take particular care when using the appliance near children or people with disabilities.
10. Do not position the appliance on or near hot gas or electric burners, or on a hot oven.
11. Great care should be taken when moving an appliance that contains hot oil or other hot liquids.
12. Do not touch any moving or revolving accessories when the appliance is in operation.
13. Do not start the appliance without first adding all the ingredients to the baking pan correctly.
14. Never knock either the top or sides of the baking pan to remove it, as this can damage the pan.
15. Do not use aluminium foil or other metal material in the multicooker as this could cause a fire or short circuit.
16. Never cover the multicooker with a towel or any other material, as heat and steam must be allowed to escape freely. A fire could
be caused if the appliance is covered with flammable material, or if flammable material were to come into contact with it.
17. Always plug the cable into the appliance before inserting the cable plug into the wall socket. To disconnect the appliance, press
the Stop/Start button and then remove the plug from the power supply.
18. This appliance has an earth lead. Please make sure that the power socket in your house is earthed.
19. This appliance should be used for the purpose for which it is intended.
20. Do not use it in the open air.
21 This appliance is not intended for use by people (including children) whose physical, sensorial or mental state prevents them from
using it safely or who lack the necessary experience or knowledge, unless supervised or given instructions regarding its use by a
person responsible for their safety. Children must be supervised to ensure they do not play with the appliance.
22. Keep these instructions.
For domestic use only.

STARTING THE APPLIANCE

When you start the appliance you will hear a beep and almost straight away the "03:00" screen will appear. Check that the colon (:)
between the "3" and "00" is not flashing continuously. The arrows indicate LARGE and MEDIUM. This is the default programme.
Adjusting the clock
You can insert the two 1.5 V AAA batteries (included) in the base of the appliance. By doing this your multicooker will act as a clock
when it is disconnected from the power supply. The use of the batteries is optional, as you prefer.
1. Before using for the first time remove the insulation from the batteries in the base of the appliance. When the batteries are
connected, the clock will indicate 12:00, and to show the difference between day and night it will indicate "AM" and "PM". To set
the correct time press the PAUSE button, keeping it in the waiting mode and the number that indicates the hour will flash.
2. Set the correct hour by pressing the TIME button. Wait a minimum of 5 seconds for confirmation and the number will stop flashing.
When the number gets to 12:00 it will change from AM to PM and vice versa.
3. Press the PAUSE button again to set the minutes. The minute digits will flash. Press the TIME button to set the minutes correctly
and then wait a minimum of 5 seconds for confirmation and then it will stop flashing.
4. Press the PAUSE button again to save the time set. The colon (:) on the clock will flash.
START / STOP BUTTON
To stop and start the chosen cooking programme.
To start a programme, press the START / STOP button. You will hear a short beep, the colon on the clock will start to flash and the
indicator will light up. Once a programme has started, all the other buttons will be deactivated except for the START / STOP and PAUSE
buttons.
To stop a programme, press the START / STOP button for approximately 3 seconds until a beep confirms that the programme has
stopped. This function will help you to avoid unintended interruptions to the programme.
16