LENCO TFT-711 User Manual page 47

LENCO TFT-711 ENGLISH
The PIN code needs to be keyed in, in order to view the Maturity rating menu. Key in the
standard PIN code 1234 if this PIN code has not been changed into a personal PIN code as
described above.
When an incorrect PIN code is entered WRONG CA PIN will be displayed in the above
screen. After the correct PIN code is entered the following menu will appear:
By default the rating is set to G, general Audience, which means that the special Channels
are secured with a PIN code and this PIN code needs to be keyed in before the channel can
be viewed.
Select the rating that is required with the ◄or ► arrow key and as advised by your
subscription provider (for example X - Erotic) to deactivate the PIN code for these special
channels.
Select with the ▼or ▲ arrow Change Card Level and press OK. On the bottom and middle
of the screen SUCCESS will be displayed indicating that the rating has been changed.
To activate the PIN code again for the special channels, set the Maturity Rating back to G.
Press the YELLOW or EXIT key to return one level in the sub-menu or press the BLUE key
to save the selection.
Note: Depending your provider, certain channels may have ratings as shown in the above
menu, please refer to your subscribers instructions to select the right Maturity rating to
deactivate the PIN code.
Page 44 of 48 pages