Specifications - LENCO SCD-26 Instruction Manual

Portable radio cd/mp3 player with usb flash disk device
Hide thumbs Also See for SCD-26:
Table of Contents

Advertisement

LISTENING TO USB FLASH DISK DEVICE
1.
Set the FUNCTION switch to CD/MP3 position.
2.
Connect the USB Flash Disk Device into the USB PORT.
3.
If the USB is readable, the display will show USB, and then start to playback
automatically from the first track.
4.
Press the STOP button to stop playing. The display will show total number of tracks.
You m ay proceed repeat play (repeat1-repeat--all)/ program / program play/ random
play/ skip up and down operation as the same described in above USING THE
CD/ MP3 .

SPECIFICATIONS

CD SECTION
Channels:
Optical pick-up:
Frequency Response:
RADIO SECTION
Receiving Band:
Tuning Range:
Antenna:
USB SECTION
Full Speed:
USB Flash Disk Version:
File System:
Auto Search:
GENERAL
Output Power:
Phones jack:
Power Source:
Power Consumption:
Note: Specifications are subject to change for continuous im provem ent without prior
notice.
Do not use any USB extension cable for connecting the USB stick which m ay cause harm ful
interference
In case of m alfunction due to electrostatic discharge, just reset the product (reconnect of
power source may be required) to resume normal operation
If at any tim e in the future you should need to dispose of this product
E-5
2 channels
3 beams laser
100Hz - 16KHz
FM/FM ST.
FM: 87.5
- 108 MHz
FM ST.: 87.5
- 108 MHz
FM rod antenna
12Mb/s, Version 1.1
1.1 or 2.0
FAT12, FAT16, FAT32
Whole Disk (MP3 File)
1.2 W x 2 (RMS)
3.5mm
AC 230V/50Hz
DC 9V 1.5V UM-2/C x 6pcs
13.5W
N-4

Advertisement

Table of Contents
loading

This manual is also suitable for:

Scd-26usb

Table of Contents