Advertisement
FOR BETTER RECEPTION
NOTE : 1. FM stereo LED indicator lights if receive FM stereo broardcast and the MODE switch set on "FM STEREO".
2. When too much noise is heard during FM STEREO reception, set MODE switch to FM mono.
AFTER LISTENING
Set the FUNCTION selector to OFF.
COMPACT DISC PLAYBACK
1 . Set to CD
2 . Open the CD door by pushing
CD Door Open / Close button.
3. Insert a disc with the label side facing up.
4 . Close the CD door.
The disc will rotate and the total
tracks of the disc will show on
the display.
TO INTERRUPT PLAYBACK
Press the Play/Pause
be flashing. Press the button again to resume playback.
CD display
MP3
MP3 display
TO SKIP TO THE BEGINNING OF A TRACK
•
Press either one of the skip buttons according to the desired skip direction.
•
Play/back resumes from the selected track.
•
When the button is pressed once during play, the previous track starts again.
MP3
•
When the button is pressed once during play, the next track plays.
SEARCHING FOR A PASSAGE WITHIN A TRACK
•
Keep the or button pressed during playback,
and release the button as soon as you recognise the desired
passage. Then normal CD playback will resume from this point.
SR24MP3-ENG-FM-LENCO-MP3-TCD08-15 5
FUNCTION
CD/MP3
MP3
button and the symbol "
MP3
WMA display
FM
5.
Press the PLAY/PAUSE
Track number "01" & the symbol "
during normal compact disc playback.
Track number "001", the symbol "
be shown during MP3 playback.
Track number "001", the symbol "
& "MP3" will be flashed during WMA playback.
CD display
MP3
MP3 display
TO STOP PLAYBACK
" will
Press the STOP button and the display shows the total
tracks of the disc.
MP3
GB 3
button.
" will be shown
" & "MP3" will
" will be shown
MP3
MP3
WMA display
6/20/2007 6:18:20 PM
Advertisement
