Advertisement
Quick Links
P.1
(1) IR (Infra-red) Transmission
IR is being "sent" or "received".
(2) Device keys
These device keys select the device to be controlled.
(3) POWER key
The POWER key controls the same function as on your original remote control.
(4) Number keys
The number (1-9, 0, 11, 12) keys provide functions just like your original remote
control. In AUD mode the number keys will provide direct input selection.
(5) -/-- key
If your original remote uses one/two digit input switching (-/--), this Function can
be obtained by pressing the -/-- key.
(6) ESC key
The ESC key provides you to exit the setup during programming and shown on
LCD as EXIT.
(7) I-II key
If available on your original remote control this key will allow you to access the
Mono/Stereo mode of your device.
(8) TV/AV key
The TV/AV key operates the same function it did on your original remote.
(9) CH +/- keys
These keys operate just as those on your original remote. During the
programming, it serves like page up and page down to move through the different
screens within certain commands.
(10)
&
keys (VOL)
These keys operate just as those on your original remote.
(11)
key (MUTE)
The MUTE key operates the same function it did on your original remote.
(12) MARCO keys
The Marco keys give you the possibility to customize the RC-8-2 to issue a
sequence of commands at the press of one button.
(13) Transport keys
When in VCR, SAT, DVD, CD, or AUD mode; these keys operate the transport
functions (REW, PLAY, FFW, etc..) of your device.
(14) Teletext Keys (
)
These keys are used to operate the main teletext functions. Of course, your
Television must have teletext capability.
(15) SET key
The SET key is used to set up your
RC-8-2 and to access special functions and operations.
(16) Red / Green / Yellow / Blue, Color +/-, Brightness +/- Keys
When accessing the text mode, the color keys marked red, green, yellow, and
blue, allow you to access the fastext functions of your television. It did also as
picture adjustment for Color (
) and Brightness (
) on TV mode status.
Advertisement
Related Manuals for LENCO RC-8-2
Summary of Contents for LENCO RC-8-2
- Page 1 The MUTE key operates the same function it did on your original remote. (12) MARCO keys The Marco keys give you the possibility to customize the RC-8-2 to issue a sequence of commands at the press of one button. (13) Transport keys When in VCR, SAT, DVD, CD, or AUD mode;...
- Page 2 CONTROLS UP TO 8 DEVICES Your RC-8-2 is designed to let you use one remote to operate your Audio and Video equipment; any device designed to be operated by an infrared signal. Your RC-8-2 comes with wide range transmitter for maximum range and is capable for High Frequency Signal.
- Page 3 If not, the LCD shown as ERROR mean that the code number may not correct. Aim the RC-8-2 at your TV and press the [POWER] key. Your TV should turn off. If none of the keys or only some of the keys operate your TV, please repeat Steps 1-5, trying each code listed for your brand until you find the one that operates your TV.
-
Page 4: Setting Up By Auto Search
Your RC-8-2 is now programmed to operate your TV. Write down your TV code on the label at the back of the RC-8-2 for future reference. To program other equipment, repeats the Steps 1-7 for your VCR, SAT, AUD and or your second TV or VCR or SAT, etc.. - Page 5 TV 001...and so on. If the TV turn off. This indicates that the RC-8-2 is now set to your TV. 10. Press the [SET] key to save the working code. The LCD shown as SUCCESS and the RC-8-2 is now ready to operate your TV.
- Page 6 The RC-8-2 comes with a complete library of pre-programmed codes. After you have set up the RC-8-2 for your device, you may find that there are one or more keys that you had on the original remote control, which do not have a place on the RC-8-2 keypad.
- Page 7 Press the [CH-] key once, it did backward to TV IR LEARN page.) Press the [SET] key once and the RC-8-2 LCD shown as TV DELETE KEY now performed the deleting process. Press the [I I] key on the RC-8-2 remote where you want to delete the learned function.
- Page 8 (2) times, it did backward to TV IR LEARN page.) Press the [SET] key once and the RC-8-2 LCD shown as SUCCESS now performed all the deleting process. The LCD of RC-8-2 will be shown as normal operation to show the status of device, weekday, and clock time.
-
Page 9: Device Unlock
Press the [DEVICE] key to select a desired mode,then press the [SET] key DEVICE SET UP (LOCK/UNLOCK) The RC-8-2 provides the device lock or unlock of the remote to avoid the in proper use of the children. Simply follow below steps: Press the [SET] key to for 2 seconds and the LCD will be shown CODE SETUP. - Page 10 HOME DEVICE SET UP The RC-8-2 provides the home device setup to let you easy use of the one device that you are use mostly. Simply follow below steps: Press the [SET] key to for 2 seconds and the LCD will be shown CODE SETUP.
- Page 11 To store the MAC1, press the [SET] key to confirm RESET ALL SET UP The RC-8-2 provides the reset all setup to let you back to the internal setup to the factory default setting. Simply follow below steps: Press the [SET] key to for 2 seconds and the LCD will be shown CODE SETUP.
-
Page 12: Teletext And Fastext
Enter the programme number exactly as you would on your original remote. The RC-8-2 does not respond after pressing a key? Make sure you are using new batteries and are aiming the RC-8-2 at your device. Upon each key press, the LCD display goes off. - Page 13 This document was created with Win2PDF available at http://www.daneprairie.com. The unregistered version of Win2PDF is for evaluation or non-commercial use only.