Advertisement
Quick Links
Listening to the radio
1. Turn the mode selection switch to FM.
2. Switch the radio on by turning volume clockwise further than the resisting
point, the indicator lamp lights up.
3. Adjust the volume with volume.
4. For FM reception, fully extend the telescopic antenna and align it for
optimum reception.
5. Set the desired station with the station tuning dial. The desired frequency
will appear in the display.
6. Switch off the radio by turning volume further than the resisting point
towards off, the indicator lamp goes off.
Advertisement
Related Manuals for LENCO NR-006
Summary of Contents for LENCO NR-006
- Page 1 Listening to the radio 1. Turn the mode selection switch to FM. 2. Switch the radio on by turning volume clockwise further than the resisting point, the indicator lamp lights up. 3. Adjust the volume with volume. 4. For FM reception, fully extend the telescopic antenna and align it for optimum reception.
- Page 2 Depending on the kind and type of socket used by the external device, it might be possible to adjust the sound and volume by means of the connected device. Technical data Model: NR-006 Mains voltage: 220 - 240 V ~ 50 Hz Power consumption < 10 W Standby (off) <...