Download
Share
Print this page
LENCO M-7001 Owner's Manual
  1. Manuals
  2. Brands
  3. LENCO Manuals
  4. Monitor
  5. M-7001
  6. Owner's manual
LENCO M-7001 Owner's Manual

LENCO M-7001 Owner's Manual

7" monitor
Hide thumbs Also See for M-7001:

Advertisement

Quick Links

Download this manual
M-7001
OWNER'S MANUAL
7" MONITOR

Advertisement

loading

Related Manuals for LENCO M-7001

Summary of Contents for LENCO M-7001

  • Page 1 M-7001 OWNER’S MANUAL 7” MONITOR...
  • Page 2 INSTALLATION The unit includes the screen display (Fig. 1) and the base (Fig. 2). You can mount the unit according to the following steps. Fig. 1 Fig. 2 CAUTION: 1. Insert the round slice (1) on the top of the base into the rectangular slot (2). Before fix the display, you can rotate the display left or right to adjust it at a proper angle to view.
  • Page 3 INSTALLATION INSTALL THE MONITOR TO THE MOUNTING BAG 1. As shown in Fig.1, the monitor is well installed in the bag. Fig. 1 INSTALL THE MOUNTING BAG WITH THE MONITOR METHOD A 1. You can separate the bag and place the monitor individually. Place the monitor on the headrest.
  • Page 4 INSTALLATION METHOD B 1. The monitor can be positioned between seats. By using “strap extenders”, the monitor can be mounted on the console between the front seats. Convenient for differentiation, the three “strap extenders” have been marked 1#, 2#, 3#. As shown in Fig.3, stick the 1#, 2# and 3# strap extenders to the proper position of the mounting bag according to the direction of the arrows.
  • Page 5 INSTALLATION INSTALL THE HEADREST BRACKET WITH THE MONITOR Plastic Bracket 1. Press the switch under the headrest of the car seat and pull out the headrest. Headrest Switch 2. Assemble the Screen Mounting Bracket (2) to Screen Mounting Bracket (1) and Rotate combined bracket, then place them on the poles of the removed headrest to select proper hold position to install the base.
  • Page 6 INSTALLATION 3. Remove the Bracket from headrest and loosen the two screws by using the screwdriver, then place the two plastic tubes (3) on the holes that you just selected, then adjust them to proper position as shown in diagram below. (3) Plastic tube 4.

  • Page 7: Adjust The Angle Of The Display

    INSTALL THE SCREEN ON THE BRACKET Insert the position plate on the screen unit into the clip screw plate and screw on the clip screw to fix the screen unit to the Mounting Bracket. Position plate (5) Position Clip-screw Rotate Bracket (6) Clip screw ADJUST THE ANGLE OF THE DISPLAY 1.

  • Page 8: Electrical Connection

    ELECTRICAL CONNECTION (3) YELLOW PVC CABLE (BLACK) (4) WHITE (5) RED (7) RED (6) BLACK (8) BLACK CAUTION: 1. Put the 9-pin mini din plug (1) into the 9-pin mini din socket (2) on the back of the display. 2. The yellow socket (3) is connected to the VIDEO socket. The white socket (4) is connected to the AUDIO Out-Left socket and the red socket (5) is connected to the AUDIO Out-Right socket.

  • Page 9: Control & Function Keys

    CONTROL & FUNCTION KEYS 7 inch COLOR TFT LCD MONITOR GB-9...
  • Page 10 POWER Press POWER button (1) to turn on the unit. Press it again to turn it off. POWER INDICATOR LIGHT When the system is on, the indicator light (2) will be illuminated. RX (REMOTE SENSOR) Point the remote control handset to the remote sensor (3). Press the function keys on the handset to control the TV, it would be worked for connecting the TV unit or DVD only.