Table of Contents
Advertisement
1.
Select the individual tracks as described previously.
2.
Navigate to top-level menu item 'Media Player' using the SELECT and BACK buttons.
3.
Press the SELECT button.
4.
Turn the knob until 'Playback Mode' is displayed.
5.
Press the SELECT button.
6.
Turn the knob until 'SHUFFLE' is displayed.
7.
Press the SELECT button.
8.
Turn the knob to select YES/NO the confirm that shuffle mode should be enabled.
Playing tracks in the queue repeatedly
1.
Select the individual tracks as described previously.
2.
Navigate to top-level menu item 'Media Player' using the SELECT and BACK buttons.
3.
Press the SELECT button.
4.
Turn the knob until 'Playback Mode' is displayed.
5.
Press the SELECT button.
6.
Turn the knob until 'Repeat' is displayed.
7.
Press the SELECT button.
8.
Turn the knob to select YES/NO the confirm that shuffle mode should be enabled.
Setup a Windows PC to allow the radio to access you audio files via a UPnP serves
1.
If your PC is running Microsoft Windows XP, then you can use Windows Media Player 11(WMP11)
to act as your UPnP( Universal Plug and Play) media server 1.0. Windows Media Player 11 may
be downloaded from Microsoft's website and install by following the instructions detailed in its
installation wizard.
2. Once installed , Windows Media Player 11 will create a library from all the media files available to
it on your PC. To add new media files to the library,
select' File > Add to Library...> Advanced Options', Click 'Add' and choose the files you wish to
add and click' OK'.
3. You will now need to connect your Internet radio to Windows Media Player 11
and configure it to allow the radio to access your media library. In order to this , you will need to do the
following:
a.
Keep pressing BACK to get to the radio's top-level menu and then turn the rotary knob to select
'Media Player'.
b.
Press SELECT and then turn the knob to highlight ' UPnP Serves'.
c.
Press SELECT and the radio will scan for all available UPnP servers . Note, this may take a
few seconds for the radio to complete its scan and before the scan has completed , the radio will
display '[Empty]'. The radio will continue to display '[Empty]' if no UPnP servers and found.
d.
After a successful scan. Select your UPnP server, by rotating the knob if there is more than
one UPnP server, and then press SELECT (note, your radio will display' Access Denied' at this
stage)
4. Your PC will now prompt you that a device has attempted to connect to your
UPnP server. In order to allow the radio to have access to the media files, you will need to click the
'Library' tab from Windows Media Player 11 and select the 'Media Sharing...' item to open the 'Media
Sharing' window.
Selecting 'Media Sharing...' for Windows Media Player11 :
Advertisement
Table of Contents
