Sony Cybershot,Cyber-shot DSC-T300 Instruction Manual page 14

[ Notes on when the power is turned on
• Once the battery is inserted in the camera, it may take time before operation becomes possible.
• If the camera is running on battery power and you do not operate the camera for about three minutes, the
camera turns off automatically to prevent wearing down the battery pack (Auto power-off function).
On the touch panel buttons
Perform settings on this camera by lightly touching the
buttons on the screen with your finger.
• When the item you want to set is not on the screen, touch
v/V/b/B to change the page.
• You can return to the previous screen by touching [BACK] or
[×].
• Touching [OK] advances to the next screen.
• If you touch the top right of the screen during shooting, the
buttons and icons will momentarily disappear. The buttons and
icons will reappear when you take your finger off the screen.
Perform calibration if response to your touch is poor.
1 Touch [HOME] and under
Settings] t [Calibration].
2 Use the paint pen to touch the center of the × mark displayed on
the screen.
14
(Settings) select [ Main