Tuner; Searching For And Storing The Radio Stations; Selecting A Stored Station; Improving Radio Reception - Samsung MM-VB9 Instruction Manual

Searching for and Storing the Radio
Stations
GB
You can store up to:
15 FM stations
15 AM stations
15 FM stations
8 MW stations
7 LW stations
15 AM stations
5 MW stations
5 SW1 stations
5 SW2 stations
1 Switch the system on by pressing on/standby (
Select the required frequency band by pressing TUNER /Band
2
again on the front panel or Band on the remote control.
Result: The appropriate indication is displayed:
FM
AM(MW)
LW(OPTION)
SW1,SW2(OPTION)
3
To search for a
station...
Manually
Automatically
PRESET function is explained in detail in the section
"Listening to the Preset Stations" on.
4
Select the station to be stored by:
Turning the Multi Jog knob to the right or to the left to
increase or decrease the frequency respectively.
or
Pressing ,
To scroll through the frequencies faster when searching
manually, hold down the
(remote control)buttons.
The automatic search procedure may stop on a frequency that does
not correspond to a radio station. If this happens, use the manual
search mode.
5
If you do not want to store the radio station found, revert to Step 4
and search for another station.
Otherwise:
a Press Program/Set.
Result: The PRGM is displayed for a few seconds.
b Press / on the main unit or turn Multi Jog to assign a
programme number between 1 and 15.
c Press Program/Set to store the radio station.
Result: PRGM is no longer displayed and the station is stored.
6
To store any other radio frequencies required, repeat Steps 3 to 5.
The PROGRAM function can be used to assign a new station
to an existing program number.
Color Display
/Demo REC/Pause
2
On/Standby
CD Synchro
AUX 4
CD Repeat
1
Phones
4
18
(option)
(option)
(option)
) .
Frequency Modulation
Medium Wave
Long Wave
Short Wave
Press Tuning Mode
One or more times until MANUAL
is displayed.
One or more times until AUTO is
displayed.
(main unit) or , (remote control)buttons.
, (main unit) or ,
Power Sound

TUNER

/Band
Surround Mode
VCD/CD
Sleep

TAPE

4 5
5
Open/Close
Mono/ST
Tuning Mode
3
4 5
5
5
3
4 5
2

Selecting a Stored Station

You can listen to a stored radio station as follows:
1
Switch the system on by pressing on/standby (
2
Select the required frequency band by pressing TUNER/Band on the
front panel.
3
Select the radio station as follows.
To listen to ...
Stored station
On/Standby
1
Phones

Improving Radio Reception

You can improve the quality of radio reception by:
Rotating the FM or AM(MW) aerial
If reception from a specific FM radio station is poor, press Mono/ST.
to switch from stereo mode to mono. The quality of the sound will be
improved.
S.Bass
Level
Multi Jog
) .
Press ...
1. Press the Tuning Mode button until
"PRESET" is displayed.
2. / to select the required
programme.
Color Display
TUNER
/Band
/Demo REC/Pause
2
VCD/CD
CD Synchro
TAPE
AUX
CD Repeat
Tuning Mode
3
S
M