Table of Contents
Advertisement
Medley Play
(This function is only available during playback of a CD.)
GB
You can select "MEDLEY ON"and "MEDLEY OFF"during
playback of a CD.
1
Press the MEDLEY button once.
Result: "MEDLEY " is displayed.
The interval time between the tracks can be shorten.
2
Press the MEDLEY button again.
Cancel this function,return to normal playback.
Repeating One or All Tracks
on the Compact Discs
You can repeat indefinitely:
A specific track on a compact disc.
All tracks on the compact disc selected.
All discs loaded in the carrousel
1
To repeat...
Press CD REPEAT on the Remote
control once or more times
until...
The current track indefinitely
REPEAT 1 is displayed
The selected disc
REPEAT 1 CD is displayed
All discs loaded
REPEAT ALL CD is displayed
2
When you wish to stop the Repeat function, press CD REPEAT until
ALL CD or 1 CD is displayed, or press
.
1,2
2
DECK
TUNING
1/2
MODE
+10
12
Function to skip through 10
tracks at a time
Press the +10 button briefly while playing back a
CD and MP3-CD. The track 10 tracks after the current
one will then be played back.
Example: If you want to select track 43 during playback of track
5, press the +10 button four times, and then press
the
button three times .
5
10
20
30
40
41
42
DECK
TUNING
1/2
MODE
+10
Last Memory Function
(This function is only available during playback of MP3-CD.)
When MP3-CD playback is selected again after your CD
player has been stopped or turned off, this function allows
playback from the start of the track that you last listened
to.
Press the PROGRAM button while your MP3-CD is being played
. The LAST ON and LAST OFF may be repeatedly selected.
COUNT
RESET
Programming the Order of CD Playback
(This function is not available during playback of an MP3-CD.)
You can decide:
The order in which you listen to the tracks on the discs loaded
Which tracks you do not wish to listen to
You can program up to 24 tracks.
You must stop the compact disc player before selecting the tracks.
This feature can be combined with the Repeat function.
43
1
If the CD function is selected, stop the player by pressing
2
Load the selected CDs.
3
Press PROGRAM.
Result: The following indications are displayed:
(01 = Programme No, DI = Disc No, – – = Track No on the disc)
4
If necessary, select the disc containing the required track by pressing
the corresponding DISC (1, 2, 3) button.
5
Select the required track by pressing the UP and DOWN button:
Press
to move back through the tracks
Press
to move forward through the tracks
6
Press PROGRAM to confirm your selection.
Result: The selection is stored and
7
To select other tracks, repeat Steps 4 to 6.
8
Press CD/MP3-CD (
/
) to listen to the track selection in the order
programmed.
9
To...
Listen to the current track again
Listen to the previous track
Listen to the next track
Skip forwards or backwards one
or more tracks
10
To cancel the selection, press
.
Once if the compact disc player is stopped
Result: PRGM is no longer displayed.
If you open the compartment, the selection is cancelled.
If you select the number of a disc which is not loaded or a
track which does not exist on the CD, the selection skips to the
next programmed track.
.
8
3,6
COUNT
RESET
is displayed.
Press the
and
...
Press
once
Press
twice
Press
once
The appropriate number of
pressing the
and
GB
4
1, 1 0
5,9
5,9
13
Hide quick links:
Advertisement
Table of Contents
