Changing Channels - Samsung SP-46K5HD Owner's Instructions Manual

Setting the Clock Automatically
9 Press the ENTER button.
Press the ▲ or ▼ button to select Off or On, then the ENTER button.
The message Select the time zone where you are located. is automatically displayed.
10 Press the ▲ or ▼ button to highlight the time zone for your local area (and to move the
highlight to the appropriate time zone on the map of the United States).
Press the ENTER button.
If clock is not automatically set, see pages 46 to set the clock.
11 The message Enjoy your watching. is displayed.
When you have finished, press the ENTER button.
➢ Even if the ENTER button is not pressed, the message will automatically disappear
after several seconds.
If you want to reset this feature...
1 Press the MENU button to display the menu.
Press the ▲ or ▼ button to select Setup, then press the ENTER button.
2 Press the ENTER button to select Plug & Play.
For further details on setting up options, refer to the top the page
➢ The Plug & Play feature is only available in the TV and DTV mode.

Changing Channels

Using the Channel Buttons
Press the CH or CH button to change channels.
➢ When you press the CH
You will see all the channels that the TV has memorized. (The TV must have memorized
at least three channels). You will not see channels that were either erased or not
memorized. See page 19 to memorize channels.
Using the Number Buttons
Use the number buttons to quickly tune to any channel.
Press the number buttons to go directly to a channel.
For example, to select channel 27, press 2, then 7.
The TV will change channels when you press the second number.
or CH button, the TV changes channels in sequence.
English - 17
16~17.
Continued...