Plug & Play Feature - Samsung PL-42S5S Owner's Instructions Manual

Plug & Play Feature
When the TV is initially powered On, basic customer settings proceed automatically and
subsequently: Setting the language, checking the antenna input, memorizing the
channels, and setting the time.
Note
• The Plug & Play function operates after plugging in the TV for the first time.
If the television is in Standby mode, press the POWER
1
button on the remote control.
The message Start Plug & Play is displayed.
Press the ENTER button to select OK.
The Language menu is displayed.
Note
• The Language menu will automatically appear
after several seconds, even if the ENTER button is
not pressed.
Select the appropriate language by pressing the
2
▲ or ▼ button.
Press the ENTER button to confirm your choice.
The message Check antenna input is displayed.
Note
• The message Check antenna input will
automatically appear after several seconds, even
if the ENTER button is not pressed.
Press the ENTER button to select OK.
3
The menu to select signal source is displayed.
Select the correct signal source (Air, STD, HRC and IRC)
4
by pressing the
ENTER button.
34
▲ or ▼
button, then press the
Plug & Play
Start Plug & Play
OK
Enter
Plug & Play
English
Language
Français
Español
Português
Move Enter
Plug & Play
Check antenna input.
OK
Enter
Plug & Play
Air
Air/Cable
STD
HRC
IRC
Move Enter
Exit
Skip
Skip
Skip