Listening to Radio
You can listen to the chosen band (FM, AM broadcast stations) by using either
the automatic or manual tuning operation.
Remote Control Unit
2
1
Press TUNER/
Tune in to the
BAND button.
desired station.
Automatic Tuning 1
•
The selection toggles back and
forth between "FM
AM" each
press
time the TUNER(BAND)
button is pressed.
Automatic Tuning 2
button to automatically search the band.
Manual Tuning
Main Unit
Press the Function
1
2
Select a broadcast
button to select the
station.
desired band (FM,
AM).
Automatic Tuning 1
PRESET and then press
button to select the preset station.
Automatic Tuning 2
press
search the band.
Manual Tuning
press
higher frequency.
Press MO/ST button to listen in Mono/Stereo.
(This applies only when listening to an FM station.)
•
Each time the button is pressed, the sound switches between "STEREO" and "MONO".
59
•
In a poor reception area, select MONO for a clear, interference-free broadcast.
Press the STOP ( ) button
to select PRESET and then
button to select the preset station.
Press the STOP (
) button to
select "AUTO" and then press
Press the STOP (
) button to
select "MANUAL",Briefly press
to increase or decrease
the frequency incrementally.
Press the STOP ( )
button to select
Press the STOP ( ) button
to select "AUTO" and then
button to automatically
Press STOP ( ) to select
MANUAL and then briefly
to tune in to a lower or
Presetting Stations
You can store up to:
15 FM stations
15 AM stations
Example: Presetting FM 89.1 in the memory
Press the
1
2
TUNER(BAND)
Press
button and select
select "89.10".
the FM band.
•
•
Each time the button is pressed,
Refer to Step 2 on page 59 to
the band switches between
automatically or manually tune in
"FM
AM".
to a station.
kHz
MHz
4
Press
to
5
Press the MEMORY
select preset
button.
number.
•
•
You can select between 1 and
Press the MEMORY button before
'PROG' disappears from the display.
15.
•
'PROG' disappears from the display and
the station is stored in memory.
kHz
MHz
To tune in to a preset station, press
remote control to select a channel.
• FM
Frequency Modulation
• AM
Medium Wave
3
Press the MEMORY
to
button.
•
"PROG" flashes in the
display.
kHz
MHz
To preset another
6
station, repeat
steps 2 to 5.
kHz
MHz
on the
kHz
MHz
60