Samsung DVD-P78000 User Manual page 12

Connection to a TV (Progressive)
1
Using component video cables (not included), connect the
COMPONENT VIDEO OUT terminal on the rear of the
DVD player to the COMPONENT IN terminal of TV.
2
Using the audio cables, connect the AUDIO (red and
white) OUT terminals on the rear of the DVD player to the
AUDIO (red and white) IN terminals of TV. Turn on the
DVD player and TV.
3
Press the input selector on your TV remote control until the
Component signal from the DVD player appears on your
TV screen.
4
Set the Video Output to Component (P-SCAN) in the
Display Setup menu. (See pages 27-28)
To see the progressive video output,
- Consult your TV User's Manual to find out if your TV supports Progressive Scan. If Progressive
Scan is supported, follow the TV User's Manual regarding Progressive Scan settings in the TV's
menu system.
- Depending on your TV, the connection method may differ from the illustration above.
Note
- What is "Progressive Scan"?
Progressive scan has twice as many scanning lines as the interlace output method has. Progressive
scanning method can provide better and clearer picture quality.
12
RED
RED
WHITE
Audio Cable
RED WHITE
BLUE GREEN
RED
BLUE
GREEN
Component cable
(not included)