Table of Contents
Advertisement
p777.book Page 94 Thursday, January 27, 2005 11:11 AM
Receive: allows you to enable or disable the reception of
broadcast messages.
Channel List: allows you to indicate the channels from
which you wish to receive broadcast messages. The
following options are available:
• Select: use to enable or disable channels on the list by marking
or unmarking them, respectively. A check mark displays in front
of each selected channel.
• Add Channel: use to enter the ID and title for a new channel.
• Delete: use to remove a channel from the list.
• Edit: use to change the ID and title of an existing channel.
Language: allows you to select your preferred language
in which to display cell broadcast messages.
Please contact your service provider for further details.
Predictive Text Mode
The Default T9 mode is allows you to set the default
setting for text messages. Select Off to disable the T9
dictionary.
Memory Status
You can check the memory amount available and
remaining for storing the messages.
1. In Idle mode, press the Menu soft key to access the
Menu mode.
2. Select Messaging. Highlight Memory Status and press
the Select soft key or the
3. Select the message type you want.
For Text Message, scroll through the memory. The
displays shows the number of messages you have stored
Section 7: Messaging
key.
94
Advertisement
Table of Contents
