Table of Contents
Advertisement
To adapt Digit Dial to your voice:
1.
Select
and press
2.
Press
(right softkey)
Settings
.
Voice
3.
Press
Start
(left softkey) to begin the process. (The
phone displays the first digit sequence.)
4.
Wait for the beep, and then repeat the words,
commands, and digits using a normal tone of
voice.
If the recording is acceptable (no mistakes and no
background noises), say
softkey.
If you need to rerecord the digits to fix any
problems, say
"No"
phone then prompts you to say the digits again.)
Wait for the beep, and then record the digits
again. (Repeat this step until you are satisfied with
the recording.)
5.
After confirming that the recording is acceptable,
repeat the recording process with the next set of
digits.
> Tools > Voice Service
> Adaptation > Adapt
or press the left
"Yes"
or press the right softkey. (The
6.
Repeat steps 4 and 5 for an additional nine sets of
digits.
.
7.
When you are finished with a full session, you will
reach a screen that reads, "Adaptation Complete."
Note
It is recommended that you perform the complete
adaptation of Digit Dial at least once to achieve the
maximum benefit of this feature. If a partial adaptation
is performed, you can always return later and resume
the process from the halfway point.
Resetting Digit Dial Adaptation
1.
Select
and press
2.
Press
Settings
.
Reset Voice
3.
Press
(left softkey).
Yes
Note
Reset Voice is available only after the phone has
undergone an adaptation session.
> Tools > Voice Service
(right softkey)
> Adaptation >
Section 2I. Voice Services
.
95
Advertisement
Table of Contents
