Rollei XS-10 - annexe 1 User Manual page 29

Rollei xs-10: user guide
Hide thumbs Also See for XS-10 - annexe 1:
Table of Contents

Advertisement

Capture Mode
This sets the recording method at the time of capturing images.
Blank
* [
] Single: Captures one image at a time.
* [
]
Continuous: Permits continuous capture of up to 3 images.
* [
]
AEB: Permits 3 consecutive images in the order of standard exposure,
underexposure and overexposure compensation.
* [
]
Burst:Permits continuous photography while pressing holding the shutter button.
As long as you hold the shutter button pressed, images are captured until the
memory capacity is exhausted.
* [
]
Series+flash: Permits continuous capture of up to 3 images with flash.
* [
]
Pre-Shot: Lets you capture the background first, then have someone to capture you in
front of it.
* [
]
Couple Shot: Uses separate areas to combine two shots. You can include yourself
in the shot.
In [Continuous], [AEB], [Burst], [Series+flash], [Pre-Shot] and [Couple Shot] capture mode, the
[Voice Memo] is automatically fixed at [Off].
Voice Memo
Refer to section in this manual titled "Recording Voice Memos" for further details.
LCD Bright.
Select a brightness level for the LCD monitor.
The LCD becomes brighter with the
adjustment range is from -5 to 5.
Digital Zoom
This sets whether or not to use digital zoom at the time of photography.
* On / Off
Preview
This sets whether or not to display the captured image on the screen immediately after
the image is captured.
* On / Off
Date Print
The date of recording can be printed directly on the still images. This function must be
activated before the image is captured.
* On / Off
button and darker with the
button. The
EN-29

Advertisement

Table of Contents
loading

Table of Contents