Exchanging Midi Data With Your Computer - Edirol StudioCanvas SD-20 Owner's Manual

Names of things and what they do
O. Computer Switch
Set this switch as appropriate for the computer or interface to which the SD-20 is connected.
* If you change the setting of the computer switch, the SD-20 must be restarted. Turn the SD-20's power
switch OFF, then ON again.
USB
Mac
PC
MIDI
P. USB Connector
Use this connector if you want to connect the SD-20 to your computer via a USB cable.

Exchanging MIDI data with your computer

There are three ways to connect the SD-20 to your computer and play it.
Using the USB connector
Using the serial connector
Using the MIDI connector
* Your computer needs to be equipped with a MIDI interface board or adaptor if you intend to use the MIDI
connector
MIDI IN
12
If using a USB connection
If using a serial connection to Macintosh
If using a serial connection to Windows
If connected to an external MIDI device
* Never connect a USB cable when the Computer switch is set to MIDI.
Method
Maximum 32 parts
Maximum 32 parts
Maximum 16 parts
THRU function: ON
USB or SERIAL
Part group A
PART A1 - A16
Part group B
PART B1 - B16
Number of available parts
fig.flow
The number of sound generator parts that
can be controlled will depend on your
software. Refer to the owner's manual for
the software you are using.
SD-20