Table of Contents
Advertisement
The Volume Bar and Navi Buttons:
The Volume Bar is marked with
-
Decreases the volume level.
+
Increases the volume level.
Pressing the Navi Button:
Puts the unit into Navi Mode and displays the Directories
or Albums on the CD.
Then use the Joypad Controls to navigate about the Directories.
For example:
1. Press Navi.
2. Press
to move down the list of Albums or press
3. Press
to make a selection.
This will then display the contents of the Album.
4. Press
to move down the list of Track Titles,
to return to the previous menu level.
5. Press
to make a selection.
The RioVolt then plays the selected song.
The Hold Switch
The Hold Switch is located at the side of the RioVolt.
•
When in the ON position, the Hold Switch locks all of the buttons on the
RioVolt and does not allow any changes to be made to the current settings.
A padlock symbol appears at the top of the display when the Hold Switch is
enabled.
•
When in the OFF position, the Hold Switch releases the buttons and allows
changes to be made.
NOTE: The Hold Switch does not turn the RioVolt power on or off. It only locks and unlocks
the buttons to avoid the RioVolt being activated accidentally.
-
+
and
signs.
Using Your RioVolt
to move up the list.
to move up the list or
Return to Pg.1
Page 10
Advertisement
Table of Contents
