Table of Contents
Advertisement
"AUTO KEYSTONE" in the
OPTION menu to "OFF" to
prevent any deterioration of the
picture as a result of keystone
correction.
i SHUTTER button
(page 43)
This button is used to
momentarily turn off the picture
and sound.
o MENU button
(pages
29
and 31)
This button is used to display the
menu screens. When a menu
screen is being displayed, this
button can be used to return to a
previous screen or to clear the
screen.
!0 Arrow (
(page 31)
These buttons are used to select
and adjust items in the menu
screens.
*When in computer operating
mode, these buttons on the
remote control unit function
differently. (page 20)
!1 ENTER button
(page 31)
This button is used to accept and
to activate items selected in the
on-screen menus.
*When in computer operating
mode, this button on the remote
control unit operates differently.
(page 20)
!2 Laser emitter
(page 19)
!3 Infrared emitter
(page 21)
!4 Click button
(page 20)
This button can be used when the
operating mode select switch is
moved to the left (Computer).
!5 PAGE button
(page 20)
This button can be used when the
operating mode select switch is
moved to the left (Computer).
16
and
) buttons
!6 Operation indicator
(page 19)
This indicator illuminates while a
laser beam is being emitted
(while the LASER button is being
pressed). It flashes when any
other buttons are being pressed.
!7 LASER button
(page 19)
A beam of laser light is emitted while
this button is being pressed. This
laser beam can be used as a pointer
to point to something on the screen.
!8 FREEZE button
(page 33)
This button is used to
momentarily freeze projection so
that a still picture is displayed.
!9 D.ZOOM +/- buttons
(page 34)
These buttons are used to
enlarge the projected image.
@0 VOLUME +/- buttons
These buttons are used to adjust
the volume of the sound output
from the projector's built-in
speaker. Refer to page
details on how to adjust the
volume using the buttons on the
projector control panel.
@1 FUNCTION (FUNC1) button
(pages
39
and 45)
This button can be used for 1)
switching on and off the sound
volume and 2) entering into the
keystone distortion correction mode.
Use the FUNC1 item in the OPTION
menu to select which you wish to use.
@2 STD (standard) button
(page 33)
This button is used to reset the
projector adjustment values to the
factory default settings.
@3 Operating mode (Computer,
Projector) select switch
(page 20)
Move this switch to the left side to
use the remote control unit to
operate a computer, and move it
to the right side to operate the
projector.
42
for
Advertisement
Table of Contents
