Wireless Settings - Panasonic PT-LB50NTE Function Manual

Network setting of the projector

Wireless settings

Select [NEXT] on the IP address setting screen, then wireless setting menu appears.
Make the settings related to the wireless LAN connection between the projector and
the network.
DETAILED SETUP
ENTER
SELECT
CANCEL
MODE
AD HOC
INFRASTRUCTURE : Connect through access point.
SSID
AUTHENTICATION : Set the user authentication method used by the network to
OPEN
SHARED
WPA-PSK
"Glossary" (See page 62)
USER1
Panasonic Projector
SSID
MODE
AUTHENTICATION
ENCRYPTION
RETURN NEXT
: Select [AD HOC] or [INFRASTRUCTURE].
: Connect projector and computer directly without access
point.
: If the mode is [INFRASTRUCTURE], enter the SSID
registered at the access point. If the mode is [AD HOC],
enter the same character string as that of SSID set on the
computer to be connected.
be connected.
: Select when making a connection using [AD HOC], or when
the access point authentication method is OpenSystem .
: Select when making a connection using [AD HOC], or when
the access point authentication method is Shared Key .
: Select when the access point authentication method is WPA-
PSK.
50
(cont.)
2/3
AD HOC
OPEN
NONE
CANCEL