Connection
The telephone line cord
(included)
< Back view >
CAUTION
Ensure the cord is
inserted in the groove
to prevent damage
to the connector.
Wall Mounting
1
Pull down the handset hook until it locks,
so the tab holds the handset.
3
Mount the unit on the wall.
83 mm
(3-1/4 in)
18
To the main unit (
Disable the parallel setting for the single line
telephone (SLT) in PBX programming. If it is enabled,
the Talking Caller ID feature may not operate properly.
For information on how to disable, refer to the
documentation for your PBX.
TO MAIN UNIT
/PABX
2
Remove the attached stand.
1
To temporarily place the handset down
during a conversation, hook it over the
top edge of the phone as shown.
)
Headset
2