Table of Contents
Advertisement
■
Assembling the pedestal
Installing the poles
For 42˝,50˝ Plasma
television (Outside)
Insert the poles into the left and right holes in the
underside of the base so that they fit securely as
shown in the illustration above.
■
Set-up
•
Carry out work on a horizontal and level surface.
B
Arrow mark
Pole
Label
Warning
Do not disassemble or modify the pedestal.
•
Otherwise the TV may fall over and become damaged, and personal injury may result.
Caution
Do not use any television or displays other than those given in this Operating Instructions.
•
Otherwise the TV may fall over and become damaged, and personal injury may result.
Do not use the pedestal if it becomes warped or physically damaged.
•
If you use the pedestal while it is physically damaged, personal injury may result. Contact your nearest Panasonic
Dealer immediately.
During set-up, make sure that all screws are securely tightened.
•
If sufficient care is not taken to ensure screws are properly tightened during assembly, the pedestal will not be strong enough to
support the TV, and it might fall over and become damaged, and personal injury may result.
Use the accessory fall-prevention brackets to secure the TV.
•
If the TV is knocked or children climb onto the pedestal with the TV installed, the TV may fall over and personal
injury may result.
Attaching the pedestal to TV
Pole
Base
Pole
Bottom view
Rear side
•
Fix securely with assembly
Base
screws
(Total 4 screws)
Securing the poles
Base
Front
Use the assembly
A
to the bottom of the base.
Note
Forcing the assembly screws the wrong way will strip
the threads.
Hole for pedestal
installation
Pole
.
B
A
screws to secure the poles firmly
Accessories
Assembly screw
(4 of each)
A
M5 x 20
B
M5 x 30
Pole (2)
Base (1)
7
Advertisement
Table of Contents
