Attaching The Lens Cap - Panasonic Lumix DMC-FZ2 Operating Instructions Manual

Attaching the Lens Cap

1
2
3
4
5
Preparation
When you turn the camera [OFF] or draw
back the lens, attach the supplied lens cap to
protect the surface of the lens.
1
Pass the top of the string through the
lens cap.
2
Pass the opposite side of the string
through the circular part of the string.
3
Pull in the direction of the arrow.
4
Pass the top of the lens cap string
through the strap eyelet as shown in
the picture.
5
Attach the lens cap.
• Remove the lens cap before turning on the
camera in the recording mode.
• Even when the lens hood is attached, you
can attach the lens cap without the string.
22