Panasonic Lumix DMC-FX150 Operating Instructions Manual page 94

Connecting to other equipment
3
Double-click on [Removable Disk] in [My Computer].
•
When using a Macintosh, the drive is displayed on the desktop. ("LUMIX", "NO_NAME"
or "Untitled" is displayed.)
4
Double-click [DCIM] folder.
5
Using a drag-and-drop operation, move the pictures you want to
acquire or the folder storing those pictures to any different folder on
the PC.
∫ Disconnecting the USB connection cable safely
•
Proceed with the hardware removal using "Safely Remove Hardware" on the task tray of the
PC. If the icon is not displayed, check that [ACCESS] is not displayed on the LCD monitor of
the digital camera before removing the hardware.
Note
•
Turn the camera off before connecting or disconnecting the AC adaptor (DMW-AC5PP; optional).
•
Before inserting or removing a card, turn the camera off and disconnect the USB connection
cable. Otherwise, data may be destroyed.
•
With the Mac OS X v10.2 or an earlier operating system, set the Write-Protect switch of the
SDHC memory card to the [LOCK] position when importing pictures from an SDHC memory card.
∫ Viewing the contents of the built-in memory or card using the PC (folder composition)
A new folder is created when pictures are taken in the following situations.
•
After [NO.RESET] (P22) in the [SETUP] menu has been executed
•
When a card containing a folder with the same folder number has been inserted (Such as when
pictures were taken using another make of camera)
•
When there is a picture with file number 999 inside the folder
∫ Connection in the PTP mode (Windows
Set [USB MODE] to [PictBridge(PTP)].
Data can now be read only from the card into the PC.
•
When there are 1000 or more pictures on a card, the pictures may not be imported in the PTP mode.
94
VQT1S88
1
Folder number
2
File number
3
JPG:
MOV:
RW2:
MISC:
R
XP, Windows Vista
Pictures
Motion pictures
Pictures in RAW files
DPOF print
Favorite
R
and Mac OS X only)