Dividing A Scene To Partially Delete (Iframe) - Panasonic HDC-SD800 Operating Instructions Manual

≥ You cannot divide a scene if you are playing back a disc with a DVD burner (optional)
connected, or if the number of scenes of a given date would exceed 99 scenes.
≥ It may not be possible to divide scenes with a short recording time.
≥ Data that has been recorded or edited on another device cannot be divided and the divided
points cannot be deleted.
≥ If personal information in the divided scenes is deleted, the personal information is deleted
when the divided scenes are cancelled.

Dividing a scene to partially delete (iFrame)

Divide the iFrame scene, and delete unnecessary parts.
This divides the recorded scenes in two and deletes the front half or back half.
The scenes that were deleted after division cannot be recovered.
≥ Change the mode to
PICTURE] to [iFrame]. (l 33)
1
Select the menu.
: [EDIT SCENE] # [SPLIT&DELETE
MENU
2
Touch the scene to be divided.
3
Touch to set the dividing point.
≥ Using slow-motion playback or frame-by-frame playback
makes it easy to search for the point where you want to
divide the scene. (l 83)
≥ Set to at least 2 seconds for the portions to be deleted and
least 3 seconds for the portion that is to remain.
4
Touch the part for deletion.
5
Touch [YES] and confirm (play back) the part for deletion.
≥ When [NO] is touched, a confirmation message appears. Proceed to step 7.
6
Stop the playback.
≥ A confirmation message appears.
7
Touch [YES].
≥ To continue dividing and deleting other scenes, repeat steps 2-7.
To complete editing
Touch [Return].
≥ It may not be possible to divide scenes with a short recording time.
≥ The actual division may slightly slip off the previously designated dividing point.
94
VQT3K43
and touch the play mode select icon. Then set [VIDEO/
]
0h00m15s 0h00m15s 0h00m15s