Palm Pixi User Manual page 228

3. Initiate a pairing from the other device.
4. When the connection request appears, tap
.
allow
5.
If a passkey is not required, pairing is complete
when the Devices list appears. If a passkey screen
appears, do one of the following:
An automatically generated passkey appears on the
Check the other device screen to
passkey screen:
verify that the passkey is correct, and tap
connect to connect.
The screen displays a passkey generated by your
phone Enter the displayed passkey on the other
:
device.
The screen prompts you to enter a passkey:
the documentation that came with the other
device to see if there's a required passkey. If so,
enter that passkey on your phone. If not, make up
a passkey and enter it on both devices.
228 3C. Web and Wireless Connections
Connect With a Paired Device
Yes,
After you pair with a device, you can connect to that
device without having to go through the pairing
process again.
Note:
To connect with a paired computer, you must initiate
the connection from the computer. See the computer
documentation for instructions.
1.
Yes, Open
Bluetooth
Check
.