Remote Control - Optoma TW610 User Manual

Remote Control

Using the Remote Control
Power
L Button
R Button
Page +
Page -
Enter / Help
Source
Re-SYNC
Four Directional
Select Keys
Keystone +/-
Volume +/-
Brightness
3D
Menu
HDMI
Freeze
User Controls
Refer to the "Power On/Off the Projector"
section on pages 13-14.
Mouse left click.
Mouse right click.
Use this button to page up.
Use this button to page down.
Confirm your item selection.
Help Menu (refer to page 21).
Press "Source" to select an input signal.
Automatically synchronizes the projector to
the input source.
Use to select items or make
adjustments to your selection.
Adjust image distortion caused by tilting the
projector.
Adjust to increase / decrease the volume.
Adjust the brightness of the image.
Press the "3D" to turn the 3D OSD menu
on/off.
Press "Menu" to launch the on-screen
display (OSD) menu. To exit OSD, press
"Menu" again.
Press "HDMI" to choose HDMI source.
Press "Freeze" to pause the screen image.
Press this button again to unlock.
19
English