User Controls
Remote Control
8
English
Using the Remote Control
Power
Mode
16:9
Native
Contrast
Menu
Re-Sync
VGA
Video
DVI
S-Video
Component
HDMI
Source
Refer to the "Power On/Off the Projector"
section
on pages 13-14.
Select the display mode from Cinema,
Bright, TV, Photo and User.
Scale the image at a 16:9 aspect ratio.
The input source will be displayed without
scaling.
Control the degree of difference between
the lightest and darkest parts of the pic-
ture.
Press "Menu" to launch the on-screen
display (OSD) menu. To exit OSD, Press
"Menu" again.
Automatically synchronize the projector to
the input source.
Press "VGA" to choose VGA D-Sub (15
pins) connector source.
Press "Video" to choose Composite video
source.
Press "DVI" to choose DVI source.
Press "S-Video" to choose S-Video source.
Press "Component" to choose Component
video source.
Press "HDMI" to choose source from
HDMI connector.
Press "Source" to select the input signal
source at the next terminal.