Olympus m:robe MR-500i Basic Manual page 10

Safety Precautions
• Stop using this product immediately when thunder has occurred. Failure to do so may cause
electric shock. Disconnect the AC adapter and refrain from using.
• Do not use while walking or driving. Doing so may cause injury or accident. Never watch the on screen
display while driving.
• Do not let any water or other foreign object get inside the device. Should the device be dropped
in water, or water gets into the internal parts, it could be result in fire or electric shock. Turn the power off
immediately and contact your nearest Olympus service center.
• Should you notice an unusual smell, over-heating, discoloration, modification or smoke,
stop using this product immediately. Leaving as it is may cause fire, electric shock or burns.
Disconnect the AC adapter, turn off the device immediately, and contact your nearest Olympus service
center.
• Should you notice leakage or an unusual smell, keep this product away from fire. Failure to
do so may cause explosion or fire.
• Do not attempt to dissemble or modify this product or AC adapter. Such action could lead to
electric shock or injury by high-voltage parts inside.
• Do not break, damage or modify the AC cord. Also, do not put a heavy object on it, pull or
bend forcefully. Doing so may cause damage to the AC cord, fire or electric shock.
Caution
• Never connect or disconnect the power plug with wet hands. This could result in electric shock.
• Do not leave this product in places of high temperature, such as in a sun-heated car. Doing
so could result in battery leakage, deterioration of parts or fire. Do not cover the AC adapter or cradle with
anything such as a cloth or blanket when in use. This may cause overheating or fire.
• Use only the specified AC adapter. Use of an unspecified adapter may result in damage or malfunction
of the device or power source. Olympus is not responsible for any damages arising from use of an
unauthorized adapter.
• Do not damage the AC cord by pulling it and do not attempt to extend it. Always disconnect the
AC adapter by pulling the plug not the cord. Discontinue use of the AC adapter immediately in the event of
the following and contact your nearest Olympus service center.
– The plug or cord is hot, there is a smell of burning, or smoke is emitted.
– The plug or cord is damaged or ruptured, or the plug connection is faulty.
EN-10