Olympus CAMEDIA C-350 Zoom Reference Manual page 122

The settings are returned to the factory default settings when the camera is turned off.
Possible cause
All Reset is set to ON.
No picture is displayed on the TV when connected to the camera.
Possible cause
The video output
signal is incorrect.
The camera is not in
the playback mode.
The TV video signal
setting is incorrect.
Corrective action
Select the SETUP tab in the mode menu and set
All Reset to OFF.
Corrective action
Set the video output signal according to the
region where used.
Press quickly twice, or close the lens
barrier and then press
playback mode.
Set the TV to the video input mode.
Troubleshooting
to switch to the
Ref. Page
P.97
Ref. Page
P.107
P.23, 79
P.84
8
121