Load Paper - Oki C810 Setup Manual

C800 series
Hide thumbs Also See for C810:
Table of Contents

Advertisement

Available languages

Available languages

Slide right edge of toner cartridge
5
down into image drum (b).
a
c
6 Push the lock lever toward the back of
as far as it will go (c).
the printer
Note: Important! If TONER SENSOR ERROR
appears when you turn on the printer,
the lever for the toner cartridge color
indicated is not pushed all the way
back.
7 Repeat these steps for each of the
remaining toner units.
8 Close the top cover.

Load Paper

1 Pull out the paper tray.
b
2 Load paper long edge feed (LEF) (1) up
to the mark (a) (letterhead paper face
down and top edge towards the right of
the printer).
3 Adjust the rear stopper, paper guides (b)
and cassette tray roller (c) to the size
and orientation of paper being used. For
A6 paper, remove and re-install in the A6
position.
a
b
4 Close the paper tray.
C800 Series Setup Guide
5
c

Advertisement

Table of Contents
loading

This manual is also suitable for:

C830dnC830nC830dtnC810nC830

Table of Contents