Oki B8300 Installation Manual page 2

Installation Manual for B8300
and Its Peripheral Devices
To install the devices efficiently, follow the procedure below.
Some peripheral devices may have been installed as
standard devies depending on the main unit model.
Part of descriptions and illustrations may be different.
Start of installation
Main unit, paper feeding
device, and power supply
unit.
Power Suply Unit
B83MP / ... (P. 2)
Power Suply Unit
B83LT / ..... (P. 3)
Power Suply Unit
B83TT / .... (P. 4)
Main unit
.................................. (P. 5)
Yes
Duplex/bypass
device installed?
No
Yes
Finishing device
installed?
No
Hard
2
Disk
Install duplex/pypass device.
B83D ....................(P. 7)
B83DB ................(P. 8)
Install finishing device.
B83MB/Power Suply Unit (P. 9)
...
B83F/Power Suply Unit (P. 10 )
.......
B83SS (P. 11)
....................................
B83THP / USP / FHP / FBP.(P. 12)
Finishing device
Main unit
Duplex device Paper feeding device
[Electrical setting/adjustment]
1) Installation of driver software, setting,
and operation check
Main unit / B83H..............
(P. 13)
2) Paper guide position adjustment/off center adjustment
B83MP / B83LT / B83TT /
B83D / B83DB.................(P. 14 & 15)
End
1: When installing a paper feeding device, an optional power supply unit or a duplex/bypass device, be
sure to reattach the rear cabinet, the AC inlet cover, and the harness cover of the main unit at the end
of installation as needed.
2: When installing electrical devices, be sure to install them one at a time.
3: Only off center adjustment is needed for B83D.
Finishing device
Duplex/bypass device
Finishing device
Main unit
Paper feeding device
1