Using The Zoom - Nikon CoolPix S8200 Reference Manual

Using the Zoom

Use the zoom control to activate optical zoom.
• To zoom in on the subject, rotate the zoom control
to g (telephoto).
• To zoom out for a wider shot, rotate the zoom
control to f (wide-angle). When you turn the
camera on, the zoom moves to the maximum
wide-angle position.
• Rotating the zoom control all the way in either
direction will adjust the zoom quickly, while rotating
the control partially will adjust the zoom slowly
(except when recording movies).
• A zoom indicator is displayed at the top of the
monitor when the zoom control is rotated.
Digital Zoom
When the camera is zoomed in to the maximum optical zoom position, rotating
and holding the zoom control at g triggers digital zoom.
Digital zoom can magnify the subject up to about 2× beyond the maximum
magnification of the optical zoom.
Maximum optical zoom
• When you are using digital zoom, the camera focuses on the subject in the
center of the frame and the focus area is not displayed.
C
Digital Zoom and Interpolation
Unlike optical zoom, digital zoom uses a digital imaging process known as interpolation to magnify
images, resulting in slight deterioration of picture quality according to the image mode (A 71) and
digital zoom magnification.
Interpolation is applied at zoom positions beyond V when taking still pictures.
When zoom is increased beyond the V position, interpolation is initiated and the zoom indicator
turns yellow to indicate that interpolation is being applied.
The position of V moves to the right as image size decreases, allowing for confirmation of the zoom
positions at which shooting without interpolation is possible at the current image mode setting.
• Digital zoom can be disabled from the Digital zoom option in the setup menu (A 94).
Digital zoom enabled
Small image size
Step 3 Frame a Picture
Zoom out Zoom in
Optical Digital
zoom zoom
27