Connecting To A Stereo Amplifier - NEC M40-AV User Manual

Connecting to a Stereo Amplifier

You can connect your stereo amplifier to your LCD monitor. Refer to your amplifier owner's
manual for more information.
Connect the LCD Monitor to a Stereo Amplifier
• Turn on the LCD monitor and the amplifier only after all connections have been made.
• Use an RCA cable to connect the AUDIO OUT connector (RCA) on the LCD monitor and
the audio input on the amplifier.
• Do not reverse the audio left and right jacks.
• The AUDIO IN is used for audio input.
• The AUDIO OUT jack outputs sound from the selected Audio input.
VCr or Laser disc player
Denotes aV unit function. all aV functions are enabled with the aV
unit is installed. not all models have the aV unit installed.
Denotes Digital tuner function. all DtV and aV functions are
enabled when the DtV unit is installed. not all models will have
the digital tuner installed.
to audio right
to audio Left
rCa
RGB/HV OUT
VGA (D-SUB) DVI (DVI-D)
RGB/HV IN
English-23
Connections
LCD Monitor
amplifier
to audio right
to audio Left
External
Speakers
- continued