Rear Panel - NAD T785 Owner's Manual

Av surround sound receiver
Hide thumbs Also See for T785:
Table of Contents

Advertisement

1
2
3
4
5
14
ATTENTION!
Please make sure that the T 785 is powered off or unplugged before making any connections. It is also advisable to power-down or unplug all associated
components while making or breaking any signal or AC power connections.
1 DIGITAL AUDIO IN (OPTICAL 1-3, COAXIAL 1-3): Connect to the
optical or coaxial S/PDIF-format digital output of sources such as CD or
DVD players, HDTV or satellite tuners and other components. Coaxial
and Optical digital input association is configurable via the Setup Menu.
DIGITAL AUDIO OUT (OPTICAL, COAXIAL): Connect the optical or
coaxial digital OUT port to the corresponding S/PDIF digital input of a
compatible device such as CD recorders, receivers, computer soundcard
or other digital processors.
2 FM, AM ANTENNA INPUT: The supplied wire "dipole" FM antenna will
connect to the FM connector using the supplied "balun" adapter. It will
usually work best when mounted on a vertical surface such as a wall,
with arms fully outstretched forming a horizontal "T" perpendicular to
the origin point of the signal.
Connect the supplied AM loop antenna to these terminals. If an external
AM antenna is used, make connections to the AM and GND terminals
in accordance with the instructions supplied with the antenna. See also
section about "LISTENING TO RADIO".
6
7
8
9
16
15
IDENTIFICATION OF CONTROLS
10
17
18
3 COMPONENT VIDEO 1-3 IN, COMPONENT VIDEO OUT: Connect
the Component Video IN 1-3 inputs to Component Video outputs
from compatible source components, typically a DVD player and
terrestrial or satellite HDTV tuner. Connect Component Video OUT to
the Component Video input of a compatible video monitor/TV. Be
sure to observe consistency in connecting the Y/Pb/Pr jacks to the
corresponding sources/inputs. The routing of the component video
inputs is fully configurable via the Setup Menu.
The T 785's component video inputs and outputs are fully wideband
and compatible with allowable HDTV formats.
4 MP DOCK: The T 785 is equipped with a data port in the rear panel
where an optional "NAD IPD 1 Dock with iPod" (NAD IPD 1) can be
plugged in. Connect the "MP DOCK (DATA PORT)" jack of the T 785 to
the corresponding "DATA PORT" socket of the optional NAD IPD 1.
REAR PANEL
11 12
13
19
20
9

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents